Lauritz Knudsen Spare - Auto Water Level Controller (WLC) | for Three Phase Double Tank | SzLC3 | Multiple Operating Modes AUTO/ MANUAL/ BYPASS | Two level Protection -Tank Drying and Overfilling
calcPageSize())"
/>
Further offers for this product
Incl. Tax
In Stock
No sellers found for this product.
Incl. Tax
Lauritz Knudsen Spare - Auto Water Level Controller (WLC) | for Three Phase Double Tank | SzLC3 | Multiple Operating Modes AUTO/ MANUAL/ BYPASS | Two level Protection -Tank Drying and Overfilling
- Description
- Documents
- Warranty
- Reviews
Description
Auto WLC: Lauritz Knudsen WLC monitors the water level in the tanks and controls the actuation of the motor/pump. The WLC can be used for applications like filling & draining the tank, filling only one tank with dual levels monitoring, draining only one tank with dual level monitoring.
This Auto WLC comes with three variants:
- SzLC Used for Single Phase Monoblock & Self Priming Pump (Upto 3HP)
- SzLC1 Used for Single Phase Submersible Pump (Upto 3HP)
- SzLC3 Used for Three Phase Submersible
Features include:
- Two level detection of water in a tank.
- One/Two tank monitoring for draining or filling or draining and filling the water.
- High load switching capacity of output up to 30A. (For SzLC & SzLC1)
- Separate LED indication for water level, power, and relay status.
- Settable power on delay and OFF timer.
- Multiple operating modes like AUTO/ ON/ OFF (For SzLC) and AUTO/ MANUAL/ BYPASS (For SzLC1 & SzLC3).
- Protections against dry run and over filling, means trip against tank emptying and over filling through probe sensing only.
Documents
Warranty
- All products listed in the price list are covered by a warranty against manufacturing defects for a period of 18* months from the date of purchase.
- For Lauritz Knudsen MCBs & Isolators mounted inside Lauritz Knudsen Distribution Boards, an extended warranty of 5 years is provided.
- In the event of a defect due to faulty workmanship or other associated reasons, the manufacturer will, at its discretion, remedy the defect or replace the faulty parts or the entire product as soon as possible, free of cost.
- This warranty is subject to proper usage and efficient maintenance and does not cover defects arising from fire, accidents, inefficient maintenance, faulty operation, or deliberate or accidental damage.
- The warranty does not cover damage to power electronic components such as thyristors & IGBTs, which primarily fail due to over-temperature or over-voltage. Users must take adequate precautions to eliminate such conditions.
- The manufacturer shall not be responsible or liable for any special, incidental, social, or consequential losses (including loss of profits), punitive damages, injury, or damages of any kind solely attributable to defect or failure of its products.
- The manufacturer shall not be liable in any manner for issues related to or failure in the performance of any other equipment to which the product is connected.
Reviews
Description
Auto WLC: Lauritz Knudsen WLC monitors the water level in the tanks and controls the actuation of the motor/pump. The WLC can be used for applications like filling & draining the tank, filling only one tank with dual levels monitoring, draining only one tank with dual level monitoring.
This Auto WLC comes with three variants:
- SzLC Used for Single Phase Monoblock & Self Priming Pump (Upto 3HP)
- SzLC1 Used for Single Phase Submersible Pump (Upto 3HP)
- SzLC3 Used for Three Phase Submersible
Features include:
- Two level detection of water in a tank.
- One/Two tank monitoring for draining or filling or draining and filling the water.
- High load switching capacity of output up to 30A. (For SzLC & SzLC1)
- Separate LED indication for water level, power, and relay status.
- Settable power on delay and OFF timer.
- Multiple operating modes like AUTO/ ON/ OFF (For SzLC) and AUTO/ MANUAL/ BYPASS (For SzLC1 & SzLC3).
- Protections against dry run and over filling, means trip against tank emptying and over filling through probe sensing only.
Documents
Warranty
- All products listed in the price list are covered by a warranty against manufacturing defects for a period of 18* months from the date of purchase.
- For Lauritz Knudsen MCBs & Isolators mounted inside Lauritz Knudsen Distribution Boards, an extended warranty of 5 years is provided.
- In the event of a defect due to faulty workmanship or other associated reasons, the manufacturer will, at its discretion, remedy the defect or replace the faulty parts or the entire product as soon as possible, free of cost.
- This warranty is subject to proper usage and efficient maintenance and does not cover defects arising from fire, accidents, inefficient maintenance, faulty operation, or deliberate or accidental damage.
- The warranty does not cover damage to power electronic components such as thyristors & IGBTs, which primarily fail due to over-temperature or over-voltage. Users must take adequate precautions to eliminate such conditions.
- The manufacturer shall not be responsible or liable for any special, incidental, social, or consequential losses (including loss of profits), punitive damages, injury, or damages of any kind solely attributable to defect or failure of its products.
- The manufacturer shall not be liable in any manner for issues related to or failure in the performance of any other equipment to which the product is connected.